2M Corning SC/SC Simplex 9/125 Single Mode Fiber Patch Cable
1. Fiber Patch Cord Basic Introduction:
Fibre Patch cords or pigtails are the non-permanent connection
between patch panels, transmission equipment, or customer premise.
Pre-assembled patch cords meet Telcordia or Grade B Random mating
specifications, dependent on your network infrastructure
requirements, and provide a complete "plug & play" solution.
Pre-assembled patch cords make it is possible to install or deploy
large cabling systems rapidly with single fibre or multi-fibre
patchcord solutions. Cable jacket options from OFNR, LSZH, or the
new ratings.
2.Fiber Optic Patch Cord SC To SC
- Free SC to SC SX SM adapter sample
- Good protection with dust cap
- SC connects with LC,FC,ST,MPO,MU, E2000, can be available
- G.657.A1 Bend Insensitive Fibre & 10mm Min. Bend Radius
- Precision Zirconia Ferrules Ensure Consistent Low Loss
- Flexible and Abrasion-resistant PVC (Riser) Jacket, Durable for
Indoor Use
- Designed for High Bandwidth and Transmission Rate over Long
Distances
- Compliant to IEC-61754 and TIA-604 (FOCIS)
3. Single Mode SC To SC Patch Cord Application:
- Building interconnections (campus LAN)
- Connector end in optical distribution boxes and termination boxes
- Cross-connect in the outdoor closet
- Fiber patch panels within communications closets
- Links between Internet electronic equipment (SFP module, Switch,
OLT, ONU, etc.), Cable TV optical equipment (Transmitter, EDFA,
Node, etc.)
4.Specification&Technology Parameters
| Parameters | Value |
| Connector Type | LC/UPC,LC/UPC |
| Center Wavelength(nm) | 1310 or 1550 |
| Max.Insertion Loss(dB) | 0.3 |
| Min.Extinction Ratio(dB) | 23 |
| Min.Return Loss(UPC) (dB) | 50 |
| Min.Return Loss(APC) (dB) | 60 |
| Key Orientation | Slow Axis |
| Axis Alignment(deg) | ±3 |
| Operating Temperature(℃) | -20~+70 |
| Storage Temperature(℃) | -40~+85 |
| FIber Type | PM Panda Fiber |
* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER
is 2dB lower.
* The default connector key is aligned to the slow axis.
5. Fiber patch cord SC Specification& Technology Parameter:
| Parameter | Unit | Index |
| End-Face Type | | PC | UPC | APC |
| IL | dB | SM: ≤0.3; MM ≤0.1 |
| Repeatability | dB | ≤0.1 |
| interchangeability | dB | ≤0.2 |
| RL | SM | dB | ≥50 | ≥50 | ≥50 |
| MM | dB | ≥36(Without APC connector) |
| Mating Times | | ＞1000 |
| Operating Temperature | ℃ | -40~ +80 |
* EX:OFC-D-LA-LA-09-1-1.0
6. Geehe Service
