OM2 2.0MM OD SIMPLEX ST APC – ST APC SINGLEMODE FIBER PATCH CORD
10M
1. Basic Introduction:
ST/APC to ST/UPC connectors, this fiber patch cable is ready for
deployment in any singlemode 9/125 network. Singlemode 9/125 are
best used for long cable runs. This singlemode, duplex fiber cable
is comprised of corning optical fiber with ceramic connectors. The
connectors utilize an APC (Angled Physical Contact) polish and UPC
(Ultra Physical Contact) Polish. It has a yellow, riser rated, PVC,
zipcord jacket.
APC Fiber Patch Cords support high speed data applications over
installations that include entrance facilities, carrier equipment,
telecommunications, patch field and CATV. The APC has been 100%
factory inspected in end face geometry in compliance with Telcord-
GR 326.
2. ST To ST Patch Cord Benefit & Features:
- Free ST/UPC fiber optic patch cable sample
- Metal joint head, ceramic ferrule, ST-ST
- 100% quality monitoring and testing
- Low insertion loss and low loss
- Standard color is Yellow, Orange, Aqua, or Purple, other colors
available upon request
- Segmented short boot for bend strain relief
- Built to exceed Industry Standards
- Simplex and duplex options are available
3. Fiber Optic Patch Cord Applications:
- Fiber Network Deployments
- Fast Ethernet
- Gigabit Ethernet
- Other Data Applications Requiring High Transfer Rates
4. Specification&Technology Parameter
| Parameters | Value |
| Connector Type | LC/UPC,LC/UPC |
| Center Wavelength(nm) | 1310 or 1550 |
| Max.Insertion Loss(dB) | 0.3 |
| Min.Extinction Ratio(dB) | 23 |
| Min.Return Loss(UPC) (dB) | 50 |
| Min.Return Loss(APC) (dB) | 60 |
| Key Orientation | Slow Axis |
| Axis Alignment(deg) | ±3 |
| Operating Temperature(℃) | -20~+70 |
| Storage Temperature(℃) | -40~+85 |
| FIber Type | PM Panda Fiber |
* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER
is 2dB lower.
* The default connector key is aligned to the slow axis.
5. ST Connector Specification& Technology Parameter:
| Parameter | Unit | Index |
| End-Face Type | | PC | UPC | APC |
| IL | dB | SM: ≤0.3；MM ≤0.1 |
| Repeatability | dB | ≤0.1 |
| interchangeability | dB | ≤0.2 |
| RL | SM | dB | ≥50 | ≥55 | ≥65 |
| MM | dB | ≥36(Without APC connector) |
| Mating Times | | ＞1000 |
| Operating Temperature | ℃ | -40~ +80 |
6. Our Service:
Your patch cord selection is important to the type of fiber optic
network you are working on. Some are ideal for single-mode, while
others might be the right for a Multimode installation. Another
factor to consider is the polished type when using single-mode
cables.
While your patch cord choice is important, it is only one piece of
the fiber-optic network to choose from. Take a look at what's
available in these other key product categories:
7. Connector Type Abbreviations:
SC - a snap-in style connector. Known for its excellent
performance. Referred to as Subscriber Connectors, Square
Connectors, or Standard Connectors.
ST - a very popular choice connector for Multimode networks. Also
referred to as Straight Tip connectors, they utilize a
bayonet-style coupling type, enabling a simple twist-on and
twist-off installation.
FC - was at one time the most popular single-mode connector type,
but is now typically being replaced by SC and LC connectors. Also
known as Ferrule Connectors, they utilize a screw-on coupling type
to be used in high-vibration environments and are commonly used for
datacom, telecom, measurement equipment, and single-mode lasers.
LC - a small form factor connector—measuring half the size of an SC
connector. This is a popular choice for single-mode cables. Also
referred to as Lucent Connectors, Little Connectors, or Local
Connectors, these snap-in connectors are typically used for
high-density connections and are compatible with plug-and-play
devices such as SFP modules and XFP transceivers.
