5M OM1 Duplex (OFNR Riser) 2.0MM ST-ST Multimode Fiber Optic Patch
Cable
1. Basic Introduction:
Multimode SC to SC Fiber Patch Cable is terminated at both ends
with ST (male) connectors, to provide the necessary connection
between fiber networking devices for high-speed, long-distance
networks.
This ST-ST patch cable is housed in a PVC (OFNR) flame retardant
jacket, to ensure minimal smoke, toxicity, and corrosion when
exposed to high sources of heat, in the event of a fire. Making it
ideal for use in industrial settings, central offices, and schools,
as well as residential settings where building codes are a
consideration.
Backed by Lifetime Warranty, our ST-ST Multimode Fiber Patch cable
is guaranteed to provide long-lasting dependability and top-quality
performance.
2. ST To ST Patch Cord Benefit & Features:
- Free ST/UPC fiber optic patch cable sample
- Metal joint head, ceramic ferrule, ST-ST
- 100% quality monitoring and testing
- Low insertion loss and low loss
- Standard color is Yellow, Orange, Aqua, or Purple, other colors
available upon request
- Segmented short boot for bend strain relief
- Built to exceed Industry Standards
- Simplex and duplex options are available
3. Fiber Optic Patch Cord Applications:
ST to ST fiber optic patch cord is suitable for the CATV network,
telecommunication network, computer optical fiber network, and
optical test equipment.
4. Specification&Technology Parameter
| Parameters | Value |
| Connector Type | LC/UPC,LC/UPC |
| Center Wavelength(nm) | 1310 or 1550 |
| Max.Insertion Loss(dB) | 0.3 |
| Min.Extinction Ratio(dB) | 23 |
| Min.Return Loss(UPC) (dB) | 50 |
| Min.Return Loss(APC) (dB) | 60 |
| Key Orientation | Slow Axis |
| Axis Alignment(deg) | ±3 |
| Operating Temperature(℃) | -20~+70 |
| Storage Temperature(℃) | -40~+85 |
| FIber Type | PM Panda Fiber |
* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER
is 2dB lower.
* The default connector key is aligned to the slow axis.
5. ST Connector Specification& Technology Parameter:
| Parameter | Unit | Index |
| End-Face Type | | PC | UPC | APC |
| IL | dB | SM: ≤0.3；MM ≤0.1 |
| Repeatability | dB | ≤0.1 |
| interchangeability | dB | ≤0.2 |
| RL | SM | dB | ≥50 | ≥55 | ≥65 |
| MM | dB | ≥36(Without APC connector) |
| Mating Times | | ＞1000 |
| Operating Temperature | ℃ | -40~ +80 |
6. Our Service:
Your patch cord selection is important to the type of fiber optic
network you are working on. Some are ideal for single-mode, while
others might be the right for a Multimode installation. Another
factor to consider is the polished type when using single-mode
cables.
While your patch cord choice is important, it is only one piece of
the fiber-optic network to choose from. Take a look at what's
available in these other key product categories:
7. Connector Type Abbreviations:
SC - a snap-in style connector. Known for its excellent
performance. Referred to as Subscriber Connectors, Square
Connectors, or Standard Connectors.
ST - a very popular choice connector for Multimode networks. Also
referred to as Straight Tip connectors, they utilize a
bayonet-style coupling type, enabling a simple twist-on and
twist-off installation.
FC - was at one time the most popular single-mode connector type,
but is now typically being replaced by SC and LC connectors. Also
known as Ferrule Connectors, they utilize a screw-on coupling type
to be used in high-vibration environments and are commonly used for
datacom, telecom, measurement equipment, and single-mode lasers.
LC - a small form factor connector—measuring half the size of an SC
connector. This is a popular choice for single-mode cables. Also
referred to as Lucent Connectors, Little Connectors, or Local
Connectors, these snap-in connectors are typically used for
high-density connections and are compatible with plug-and-play
devices such as SFP modules and XFP transceivers.
