MPO Patch Cord Breakout MPO-LC 2.0mm Multi Trunk Cable 8 Cores OM3
Basic Information:
MPO HD to LC-HD (High Density ) fiber patch cables allow
high-density connections between network equipment in
telecommunication rooms. The Push/Pull tab connector can be removed
using a simple pull tab, eliminating the need for finger access to
the connector's release mechanism in dense applications.
This high-density trunk cable can directly couple into 16x25G
active devices, which are compiled by Telcordia GR-326 Core, TIA
604-18 (FOCIS 18), and IEC (61754-7-3) standards.
High-quality OM4, OM3, or single-mode optical fibers, a variety of
standard, and breakout configurations.
Features&Benefits:
- Low insertion loss and optimized optical return loss values
- Space-saving multi-fiber cable
- Multi-fiber design reduces cleaning and mating time
- High fiber density (maximum 24 fibers for Multimode)
- Single-mode and Multimode (Flat/Round) available
- Highest density physical contact for multi-fiber connectors
- Small diameter provides superior bend performance
- Single-mode, and laser optimized 50 μm (10G) fiber available
- Standard 2.0 mm furcation for single fiber connectors
Specifications and Parameter:
MPO Fiber Cable Optic Performance:
| MPO Connector | Standard Sm | Low Loss Sm | Standard Mm | Low Loss Mm |
| Insertion Loss | Typical(dB) | 0.35 | 0.2 | 0.35 | 0.2 |
| Maximum(dB) | 0.75 | 0.35 | 0.6 | 0.35 |
| Return Loss (dB) | ≥60 for APC
(8 angle polish) | ≥20 for PC |
| ≥50 for PC | — |
| Male/Female(dB) | Male:with pins,Female:without pins |
| Tensile Strength (dB) | ≤0.3 ( max 66N ) |
| Vibration (dB) | ≤0.3 ( 10-55Hz ) |
| Thermal Cycle (dB) | ≤0.3 (-40~75℃, 21cycles) |
Geometric parameter of end-face:
| Item | Spec |
| SM | MM |
| RX(mm) | MIN 2000 |
| RY(mm) | MIN 5 |
| Fiber Height (nm) | 1000-3500 |
| Max. diff. Height all (nm) | MAX: 500 |
| Max. diff. Height adj (nm) | MAX: 300 |
| X-Axis Angle ( °) | -0.2 ~ 0.2 |
| Y-Axis Angle ( °) | PC: -0.2 ~ 0.2
APC: 7.8 ~ 8.2 | -0.2 ~ 0.2 |
| Core Dip | N/A | -100 ~ 200 |
Ordering Information:
| MPO | -XX | -XX | -XX | -X | -XX | -X | -XX |
| A1: G657A1
A2: G657A2
M3: OM3
M4: OM4
M5: OM5 | LZ: LSZH
NP: OFNP
NR: OFNR | FF: MPO /MPO(female to female )
MF: MPO/MPO (male to a female)
MM: MPO/MPO (male to male) | L: Low loss
B: Standard loss | 12:1×12 core
48:4×12 core
72:6×12 core
96:8×12 core | A: TIA568 through-type
B: TIA568 Reverse type
C: TIA568 cross-type | 5M to
50M |
| Gender Type | Housing color | Ferrule | Connector loss standard | Fiber cores | Polarity | Fiber length |
MPO Fiber Patch Cord Application:
- Data Centers
- Storage Area Networks (SAN)
- Local Area Networks (LAN)
- Any 10G, 40G, or 100G Networks
- Telecommunication networks
- Optical switch interframe connection
- Asynchronous Transmission Mode (ATM)
Geehe's Standards Compliance :
- Low smoke (IEC 61034)
- Halogen-free (IEC 60754-1)
- Fire retardant (IEC 60332-3)
- Corrosion-resistant (IEC 60754-2)
- Compliant to TIA 604-5 and IEC 61754-7
- Standards ISO/IEC 11801 / EN 50173-1 / TIA-568C.0
- Data Center EN 50173-5 / ISO/IEC 24764/ TIA-942
- Ethernet IEEE 802.3; 10/40/100GbE
