Black Box Duplex LC/UPC To 24F MPO Male HD Fiber Optic Enclosure 1U
1. Product Description:
MPO cassette module is mainly used to divide the 12 fibers' MPO
connector of the pre-assembled terminal end to the simplex or
duplex standard connector. By using the simplex or duplex patch
cord, the output of the module can be directly connected with the
equipment, frame, or client’s end.
This transition module is characterized by single core or double
core port in module front, 12 core SC simplex and LC duplex
connectors are optional, one or two adapters are installed on the
back, the nodule is transition patch cord, directly connected the
module front panel with the back of the adapter.
2. HD Fiber Optic Panel Features & Benefits:
01| The front panel is equipped with LC, MTRJ or SC adapter, rear
panel assembles the MPO adapter
02| Adopts high-quality engineering plastics and aluminum alloy
materials, with electrostatic plastic-sprayed on the surface,
making it beautiful in outlook and convenient in use
03| MPO faceplate can be upgraded easily
04| There is a mark in the front of each port, and can be easily
identified
05| Quick and easy installed, flexible in configuration and easy to
management
06| Labelling space available, for visual identification
07| Saves space and footprint through increased port density
3. HD Fiber Patch Panel Applications:
01 | Data communication applications
02 | Data Center infrastructure
03 | Storage Area Network – Fiber Channel
04 | Emerging 40 and 100Gbps protocols compatible
05 | Ethernet, LAN, MAN and WAN applications
4. Specification and Technology Parameter
| Product | HD 2U Fiber patch panel |
| Material | Cold-rolled steel sheet |
| Cassettes | 4 pcs MPO Cassettes |
| Max Capacity | 96 Cores |
| Adapter | LC adapter, MPO adapters |
| Colors | Black |
| patch cord Qty | 1x24fo, 2x12Fo ,1x12 Fo |
| Fiber Mode | G657A1, OM1,Om2,Om3,Om4 |
| Panel Height | 2U |
5. Frequent Q&A For HD Fiber Patch Panel :
Q1: What are the benefits of using a patch panel?
A: Patch panels will allow testing routing and maintenance of
network cables connected to your network. With a patch panel, this
is quickly done just by making changes to cables on the patch panel
itself. Patch panels also allow for easier cable management and
identification of cable routing.
Q2: What is a rack unit?
A: A rack unit U or RU is a unit of measure that describes the
height of equipment designed to mount in a rack. A rack unit is
1.75 inches. Typically one rack unit will take three vertical screw
holes on each side of a standard rack.
Q3: Can I use any fiber patch cable in my network with my
enclosure?
A: If your fiber enclosure is loaded you must have cables that are
compatible with the included adapters. For unloaded enclosures, you
must select adapter panels that correspond to your fiber connector
type or use a splice tray for single- and mass-fusing.
Q4: What are the differences between the fiber connectors?
ST- Uses a push and turn to lock system
SC- Has a molded plug casing with push and pull locking system
6.Wuhan Geehe Comm Service For You:
1) High Environmental Stability
Low insertion loss, low polarization dependent loss, low back
reflection, and good uniformity
2) Compact Structure
Small size, it can be directly installed in a variety of transfer
box and just take up little space
3) Strict Quality Control
We guarantee that every product to the hands of customers is
subject to stringent testing standards
4) 100% Support for customers During Special Time
- More payment methods can be chosen
- Factory Inspection
- Delivery Term
- No MOQ for orders
