Single mode Fiber Cable 62.5/125 ST-ST Fiber Optic Jumper For Data
Center
1. Basic Introduction:
ST UPC to ST UPC fiber optic patch cord is used to connect fiber
optic equipment to equipment or patch panel to equipment. It
comprises a patch cable terminated with ST fiber optic connectors
at both ends. Both simplex and duplex types are available with
Singlemode and Multimode optic fiber types supported.
ST to ST fiber patch cables is all tested for 100% functionality and guaranteed compatible for
outstanding network performance. We offer patch cords, fiber
jumpers, and fiber cables up to 50 meters in length.
2. ST To ST Patch Cord Benefit & Features:
1) Free ST/UPC fiber optic patch cable sample
2) Metal joint head, ceramic ferrule, ST-ST
3) Fiber Spherical Height: -90 nm, +50 nm
4) 100% quality monitoring and testing
5) Good durability and exchangeability
6) Various Connector Type Available
7) High-temperature stability
8) Low Insertion Loss and Back Reflect
3. Fiber Optic Patch Cord Applications:
1) Optical Fiber Communications, Video, LAN, CATV Systems
2) Optical Network Equipments, Optical Test Equipment
3) Module Pigtails, Multimedia, Premise
4) Active device termination installations
4. Specification&Technology Parameter
| Parameters | Value |
| Connector Type | LC/UPC,LC/UPC |
| Center Wavelength(nm) | 1310 or 1550 |
| Max.Insertion Loss(dB) | 0.3 |
| Min.Extinction Ratio(dB) | 23 |
| Min.Return Loss(UPC) (dB) | 50 |
| Min.Return Loss(APC) (dB) | 60 |
| Key Orientation | Slow Axis |
| Axis Alignment(deg) | ±3 |
| Operating Temperature(℃) | -20~+70 |
| Storage Temperature(℃) | -40~+85 |
| FIber Type | PM Panda Fiber |
* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER
is 2dB lower.
* The default connector key is aligned to the slow axis.
5. ST Connector Specification& Technology Parameter:
| Parameter | Unit | Index |
| End-Face Type | | PC | UPC | APC |
| IL | dB | SM: ≤0.3；MM ≤0.1 |
| Repeatability | dB | ≤0.1 |
| interchangeability | dB | ≤0.2 |
| RL | SM | dB | ≥50 | ≥50 | ≥50 |
| MM | dB | ≥36(Without APC connector) |
| Mating Times | | ＞1000 |
| Operating Temperature | ℃ | -40~ +80 |
6. Our Service:
Your patch cord selection is important to the type of fiber optic
network you are working on. Some are ideal for single-mode, while
others might be the right for a Multimode installation. Another
factor to consider is the polished type when using single-mode
cables.
While your patch cord choice is important, it is only one piece of
the fiber-optic network to choose from. Take a look at what's
available in these other key product categories:
7. Connector Type Abbreviations:
SC - a snap-in style connector. Known for its excellent
performance. Referred to as Subscriber Connectors, Square
Connectors, or Standard Connectors.
ST - a very popular choice connector for Multimode networks. Also
referred to as Straight Tip connectors, they utilize a
bayonet-style coupling type, enabling a simple twist-on and
twist-off installation.
FC - was at one time the most popular single-mode connector type,
but is now typically being replaced by SC and LC connectors. Also
known as Ferrule Connectors, they utilize a screw-on coupling type
to be used in high-vibration environments and are commonly used for
datacom, telecom, measurement equipment, and single-mode lasers.
LC - a small form factor connector—measuring half the size of an SC
connector. This is a popular choice for single-mode cables. Also
referred to as Lucent Connectors, Little Connectors, or Local
Connectors, these snap-in connectors are typically used for
high-density connections and are compatible with plug-and-play
devices such as SFP modules and XFP transceivers.
