Nickel Plated Metal Fiber Optics Connector ST/UPC Simplex Single Mode

Brief Introduction:

An Optic fiber Connector terminates the end of an optic fiber cable and enables quicker connection and disconnection. The connectors mechanically couple and align the cores of fibers so that light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers.

The ST connector family (straight tip) represents the standard connector type for installations and is frequently used in local networks. A typical feature of the ST connector family is the bayonet connection, also known as the BFOC connector (bayonet FO connector). The standard ST connector for telecommunications, LAN, industry, medical and sensor technology. The ST FO connector family meets the standards: IEC 61754-2 and CECC 86 115-801.

Ferrule: this is a thin structure (often cylindrical) that actually holds the glass fiber. It has a hollowed-out center that forms a tight grip on the fiber. Ferrules are usually made from ceramic, metal, or high-quality plastic, and typically will hold one strand of fiber.

Connector Body: this is a plastic or metal structure that holds the ferrule and attaches to the jacket and strengthens members of the fiber cable itself.

Coupling Mechanism: this is a part of the connector body that holds the connector in place when it gets attached to another device (a switch, NIC, bulkhead coupler, etc.). It may be a latch clip, a bayonet-style nut, or a similar device.

Fiber Optic connectors Features and Advantages:

• High Precision Ceramic Ferrule
• Simplex or Duplex
• APC Green Polymer housing with 900μm and 3mm strain relief boot
• Low Return Loss
• Low cost
• Low environmental sensitivity
• High Precision Polymer housing
• High Precision Nickel-plated brass housing
• Low Insertion Loss
• Ease of installation
• Reliability
• Ease of use

Application of SC Connector:

• Optical Amplifers
• EDFA& Raman Amplifier
• Fiber Sensor
• Fiber Laser
• Test Instrumentations

Technology Specification& Parameters:

Order Information:

More Fibre Optic Connector Types:

Geehe Service:

Who is Geehe Comm?

Geehe Comm was founded in 2006, and we have been in the Passive Optics field for more than 15 years.

We have previously focused on domestic trade OEM service for Brands in China and eventually achieved the industry's Top ten annual sales of more than 500 million.

Also OEM service for American and European brands from the 2016 year.

We have seen that today there are also many factories and wholesalers internationally. However, their level of craftsmanship and testing are still stuck in a few years ago.

In fact, the production equipment of testings has been upgraded in recent years, and Geehe Comm hopes our advanced technology can inject fresh blood into this market.

Consumers deserve a better Fiber patch cord.